Synology heeft nog niet zo lang geleden versie 1.2 van Router Management uitgebracht en inmiddels zijn er ook alweer twee kleine updates met bugfixes verschenen. SRM is de firmware die op de routers van Synology draait en is in zekere zin vergelijkbaar met Disk Station Manager, de firmware voor de nassen van hetzelfde bedrijf. Deze apparaten weten uitstekende prestaties neer te zetten, hebben uitgebreide mogelijkheden en zijn via een overzichtelijke webinterface eenvoudig te bedienen. Versie 1.2 voegt onder meer ondersteuning toe voor de MR2200ac, de de eerste meshrouter van Synology. De complete release notes kunnen hieronder worden gevonden.
Version: 1.2-7742-2
Fixed Issues
- Fixed an issue where RT1900ac might fail to access certain websites under AP mode.
Version: 1.2-7742-1
Fixed Issues
- Fixed an issue where the status of Network Center might not be displayed correctly when the wireless encryption mode is set at WPA2/WPA3-Personal.
- Fixed an issue where RT1900ac might fail to establish a connection after upgrading to SRM 1.2 under client mode.
- Fixed an issue where Synology Router might fail to access the Internet for a while if the connection type is Auto IP and an IP is acquired from the ISP.
- Fixed an issue where Port Forwarding, UPnP, and Port Triggering rules might not be displayed on the Firewall page.
- Fixed an issue where SRM might not work properly on RT1900ac.
Version: 1.2-7742
What's NewFixed Issues
- Added the build-in application Wi-Fi Connect for wireless related settings.
- Added support for Mesh Wi-Fi on RT2600ac and MR2200ac.
- Added support for Mesh Wi-Fi system in AP mode on RT2600ac and MR2200ac.
- Added Network Map support for Wi-Fi system management on RT2600ac and MR2200ac.
- Added support for enabling/ disabling Wi-Fi password mask.
- Added support for WPA3 Personal/Enterprise security encryption on RT2600ac and MR2200ac.
- Added support for Wi-Fi Enhanced Open (OWE) security encryption on RT2600ac and MR2200ac.
- Added support for Smart Connect in Guest Network on RT2600ac and MR2200ac.
- Added support for Guest Portal in Guest Network.
- Added support for Password Rotation in Guest Network.
- Added support for applying MAC filters to the Primary Wi-Fi Network alone or to the Guest Network as well.
- Added support for enabling/disabling AMDPU.
- Added the build-in package Safe Access for parental control and security related settings.
- Added support for the Threat Prevention package.
- Added support for DHCP options in ISP settings during the first time installation.
- Add support for manual IPv6 setup when the primary network interface is set at PPPoE.
- Added support for auto device name detection and more icons on the device list.
- Added support for TCP reset, SYN flood and ICMP flood options in DoS protection.
- Added support for Zero-wait DFS on RT2600ac.
- Added support for auto updates of databases including IP Geolocation, Domain Name, Google Safe Browsing and Threat Intelligence.
- Added support DHCPv6-PD and IPv6 Relay on RT1900ac with Client mode.
Security Updates
- Fixed an issue where Smart WAN might not work properly with Policy Route settings.
- Fixed an issue where the MTU can be set under 1280 with IPv6.
- Fixed an issue where SRM might fail to finish the First Time Installation on macOS via Wi-Fi.
- Fixed an issue where SRM web interfaces might not be accessible.
- Fixed an issue where Log Center might not record properly.
- Fixed an issue where MAC addresses might be changed on RT1900ac when the network interface is set at Secondary WAN.
- Fixed an issue where the link of Traffic Report might fail to show multiple DDNS addresses.
- Fixed an issue where MAC clone cannot be enabled through PPPoE.
- Fixed an issue where certain items of Traffic Control and Firewall might not display properly when they are selected.
- Fixed an issue where Guest Network might access private networks.
- Fixed an issue where the connection speed might decrease when LG V30 Plus is used as the USB tethering device.
- Fixed an issue where SRM might fail to back up and restore when the operation mode is changed.
- Fixed an issue where SRM might show incorrect messages when logging out.
- Fixed an issue where Pass-through might not work properly in Guest Network.
Known Issues and Limitations
- Fixed a security vulnerability regarding Linux kernel (CVE-2018-5391)
- The IPv6 tunneling page will be removed from Network Center.
- Safe Access, VPN Plus Server reports will be rotated when their storage volumes reach 200MB.
- iOS clients might fail to connect to Synology Router when the wireless security encryption is set at WPA2/WAP3-Personal.
- Customized policies of Parental Control of devices on SRM 1.1 cannot be migrated to Safe Access on SRM 1.2.
- If the Synology Router is set at Wireless Client Mode, then the web filter and security protection of Safe Access might not work correctly.
- SRM cannot back up and restore IPTV settings from RT2600ac or RT1900ac to MR2200ac.
- There cannot be two mesh Wi-Fi systems in one subnet.
- Wi-Fi points can only be added into Wi-Fi systems via Wi-Fi. If Ethernet backhaul is connected, please remove the cable before adding new Wi-Fi points.
- Intrusion Prevention not be supported on SRM 1.2 and above.
:strip_exif()/i/2002247781.png?f=thumbmedium)
:fill(white):strip_exif()/i/2000777395.jpeg?f=thumbmedium)
:fill(white):strip_exif()/i/2001350047.jpeg?f=thumbmedium)
:strip_icc():strip_exif()/u/21673/crop65674aee06c6d_cropped.jpg?f=community){kind=small}
:strip_icc():strip_exif()/u/29102/m_whisky_single_malt2.jpg?f=community){kind=small}
:strip_icc():strip_exif()/u/25212/crop5bb715b4827b7_cropped.jpeg?f=community){kind=small}