Software-update: UniFi 5.6.30

Ubiquiti Networks heeft een stabiele versie vrijgegeven van UniFi, met 5.6.30 als versienummer. Dit is een netwerkmanagementcontroller waarmee een netwerkomgeving op basis van UniFi-hardware beheerd kan worden. Denk daarbij aan het inregelen van accesspoints, routers en switches om tot een optimaal dekkend, uniform netwerk te komen. Daarnaast kun je een hotspotportal opzetten en integreren met verschillende paymentproviders, zoals Authorize en PayPal. Voor gebruikerservaringen kun je zowel op Gathering of Tweakers als op het forum van Ubiquiti terecht. Een demo is op deze pagina uit te proberen. De aankondiging van versie 5.6.30 ziet er als volgt uit:

Controller bugfixes/changes from 5.6.29:
  • Fix displaying blank page on double click on Insights.
  • Fix downloading large backups over WebRTC.
  • Improve reliability of UniFi Cloud Access service (unifi.ubnt.com).
  • Various backend bugfixes and improvements.
Firmware changes since 3.9.15/4.4.12:
  • [HD/SHD/XG] Stability and performance improvements.
  • [HD/SHD/XG] Fix a memory leak when multicast enhancements are enabled.
  • [AC-IW/IW-Pro/Pro/EDU/M-Pro] Add ability to set port negotiation.
  • [nanoHD] Fix MBSS support.
  • [nanoHD] Stability improvements.
  • [nanoHD] Add guest control support.
  • [nanoHD] Add 802.1X support.
  • [nanoHD] Add support for multiple BSSIDs per radio.
  • [nanoHD] Fix issue when using a bracket in the ESSID or PSK.
  • [nanoHD] Fix auto channel selection.
  • [nanoHD] Fix 802.11n negotiation issue.
  • [nanoHD] Fix issue which could cause Ethernet to stay down after provision or reboot.
  • [UAP] Improve STA signal reporting.
  • [UAP] Wireless uplink/mesh V3 improvements.
  • [UAP] Fix a bug with rate control when using multiple SSIDs.
  • [UAP] Fix NAS-IP-Address attribute so that it always returns the management IP of the AP.
  • [UAP] Various bugfixes and improvements.
  • [USW] Various improvements.
  • [USG] Added non-offloaded DPI support - DPI now functions when hardware offloading is disabled, so co-exists with features that disable or bypass it (smart queues, IDS/IPS). This does not change anything when hardware offload is enabled.
  • [USG] GeoIP fixes - all known problems with it resolved, added back end for directional control.
  • [USG] SNMP persistent directory relocated to RAM disk, which prevents "Unhandled kernel unaligned access" crash
  • [USG] Removed core handling script that was causing reboots when large core files were generated
  • [USG] Fix IGMP proxy failing to start during boot a few were experiencing.
  • [USG] Fix potential issue of UPnP failing to start during boot.
  • [USG] Change IPS loading of ipset contents to more efficient method to greatly reduce CPU usage after initial bootup and enabling of service.
  • [USG] xl2tpd package upgraded
  • [USG] Other IDS/IPS back end improvements
  • [USG] Fix ubnt-cfgd zombie process issue
  • [USG] Added SNMPv3 back end
  • [USG] Added lock wait to all iptables operations to avoid errors in cases where multiple operations happen simultaneously.
  • [USG] DPI signature update
  • [USG] Add IDS/IPS back end
  • [USG] Fix in informs for IPv6 PD size (was causing PD size to be cleared in controller).
  • [USG] Add support for sending custom events to controller.
  • [USG] Fix DDNS update public IP checking for NATed WANs
  • [USG] Local UI now checks ping to ping.ubnt.com rather than default gateway for Internet connectivity test
  • [USG] Copy 'hostname' and 'mailname' over during upgrades for consistency with other retained files cross-upgrade (from EdgeRouter, generally no functional impact for USG purposes).
  • [USGXG] Bluetooth back end updates.
  • [USGXG] VLAN hardware offload improvements.
  • [USGXG] DHCP hardware offload problem fixed.
  • [USGXG] LCM (display) firmware update including splash screen, update process improvements.
  • [HW] New procotol implementation.
  • [HW] Add controller support for netconsole.
  • [HW] Fix some issues which would cause L3 adopted devices to show up as disconnected in the controller.
  • [HW] Fix SNMP sysName.
Recommended Firmware: Download:
Versienummer 5.6.30
Releasestatus Final
Besturingssystemen Windows 7, Linux, macOS, Windows Server 2008, Windows Server 2012, Windows 8, Windows 10
Website Ubiquiti Networks Community
Download https://community.ubnt.com/t5/UniFi-Updates-Blog/UniFi-5-6-30-Stable-has-been-released/ba-p/2220761
Licentietype Voorwaarden (GNU/BSD/etc.)

Door Japke Rosink

Meukposter

31-01-2018 • 17:08

8

Bron: Ubiquiti Networks Community

Update-historie

12-'21 UniFi 6.5.55 13
09-'21 UniFi 6.4.54 18
06-'21 UniFi 6.2.26 38
05-'21 UniFi 6.2.25 80
03-'21 UniFi 6.1.71 62
11-'19 UniFi 5.12.22 30
10-'19 UniFi 5.11.50 1
02-'19 UniFi 5.10.17 34
02-'19 UniFi 5.10.12 25
10-'18 UniFi 5.9.29 12
Meer historie

Lees meer

Reacties (8)

8
8
4
0
0
4
Wijzig sortering
Ik heb 'm al geruime tijd succesvol op een rpi2 draaien maar na diverse "aanvaringen" waarbij de installatie na de upgrade niet meer werkte heb ik me voorgenomen om de nieuwe versies eerst eens rustig te volgen ipv meteen te upgraden. Deze versie laat ik dan ook even een tijdje aan me voorbij gaan.
en altijd even een backupje maken van de site / config:) al dan niet automatisch
Precies, dat overkwam mij gelukkig maar 1x.
Een check for new version in de Unifi software zelf (5.6.29) geeft ook nog geen nieuwe versie terug en de download staat nog niet bij de downloads zelf.
Komt meestal ietsjes later is mijn ervaring.

En belangrijk om te lezen waar je rekening mee moet houden bij het upgraden:

https://community.ubnt.co...een-released/ba-p/2220761

Zoals bijv.:

Important Notes:

* The initial database migration will take longer than normal. It is expected to see mongo using most, if not all, of the available CPU cycles during this process. Please be patient, this process could easily take 15+ minutes, depending on the amount of historical stats, as well as the system specs. As always, err on the side of caution, and make a backup before upgrading.
* The controller will not start if it is set to bind to a privileged port (<1024), as it now runs as a non-root user.
* If your controller is running on a UniFi Cloud Key (UCK), make sure it is on firmware 0.6.4 or later, otherwise the controller will not start. This firmware is available via the normal upgrade mechanism found in the controller or it's local management page. Make sure to make a backup before upgrading the UCK firmware, as you'll need it to restore after, and it's good to have a backup on hand before any controller upgrade.


Known Issues:

* Manual site-to-site VPN status is not reflected on the UniFi dashboard widget. Currently it will look like it's offline, even when the tunnel is up.
* airTime will not work if a radio is disabled and/or there isn't any SSID present. This will be fixed in a future release. If you enable it, and it still isn't working, then you may need to force a refresh without cache.
* If you start both a 2.4GHz and 5GHz scan in quick succession, then it will fail.
* It is expected that airView will stop occasionally. A stop/start sequence should restore functionality.
* If you start an airTime scan while airView is running, then airView will stop and you'll need to perform a stop/start sequence to get it working again. This will be fixed in the future.

[Reactie gewijzigd door toxict op 23 juli 2024 04:17]

Dat klopt. Wanneer Ubiquiti een Stable release aankondigt wordt deze pas na 1 week beschikbaar op de publieke downloadpagina. :Y)
Dat stukje wist ik al.
En daarom bracht het me enigszins in verwarring dat Tweakers een nog niet publiekelijk aangekondigde versie post hier.
Want ik weet dat er heel veel versies worden gepost bij UBNT.
Want dan mis ik de stables van 5.7.x ook hier.
Meestal is dit niet direct vanuit de software te downloaden.

This release follows our usual release structure which means it will initially be available via this blog post only. It will be posted to the download site and official repos in the near future. If you aren't familiar with our release structure, please take a moment to read our post HERE. Thanks!

dus voor debian
wget https://dl.ubnt.com/unifi/5.6.30/unifi_sysvinit_all.deb
sudo dpkg -i unifi_sysvinit_all.deb

Op dit item kan niet meer gereageerd worden.