Versie 24.10.2 van OpenWrt is uitgekomen. OpenWrt is alternatieve opensourcefirmware voor een groot aantal verschillende routers en embedded devices. Door middel van het opkg-packagemanagementsysteem is er de mogelijkheid om zelf te bepalen wat de router allemaal wel en niet kan. Ook op GoT zijn er diverse mensen actief mee bezig: zie daarvoor dit topic. Bijwerken van de versie kan met een Attended Sysupgrade, handmatig met een voorgecompileerde firmware versie van het apparaat dat je gebruikt, of compileer je eigen variant met de firmware selectie. De changelog voor deze uitgave kan hieronder worden gevonden.
Device supportVarious fixes and improvements
- Added new devices:
- bcm27xx: bcm2712: RPi 5 (d0 rev)
- bcm27xx: bcm2712: RPi 500
- bcm27xx: bcm2712: RPi CM5
- mediatek: filogic: ASUS RT-AX52
- mediatek: filogic: Cudy WR3000E
- mediatek: filogic: Cudy WR3000H
- mediatek: filogic: Mercusys MR80X v3
- mediatek: filogic: Routerich AX3000 v1
- mediatek: filogic: TP-Link Archer AX80v1(US/RU/CA)
- mediatek: filogic: WAVLINK WL-WN573HX3
- ramips: mt7621: Arcadyan WE410443
- ramips: mt76x8: Xiaomi MiWiFi 3A
- ath79: TP-Link Archer C6 v2: fix 5GHz Wifi
- bcm27xx: add BRCMSTB I2C driver
- bcm27xx: select I2C and SPI packages by default
- bcm27xx: switch to upstream SDHOST driver
- bmips: backport bcm63xx SPI reset fix
- bmips: backport brcm legacy dsa tag fix
- ipq40xx: Teltonika RUTX50: turn on modem by default
- ipq40xx: Teltonika RUTX50: use correct wired MAC-addresses
- ipq806x: Extreme Networks AP3935: fix LAN/WAN ports
- ramips: Genexis EX400: add touch controller
- ramips: mt7621: fix Ethernet stability (deactivate EEE)
- realtek: fix mdio parent/child locking issues
- realtek: proper RTL8214FC fibre/copper detection
- rockchip: NanoPi R6C/R6S: fix SD card detection
Core components update
- GCC 15: multiple fixes to allow building with host GCC 15
- kernel: generic: add Broadcom NetXtreme-C/E driver
- kernel: generic: add DesignWare I2C driver
- kernel: generic: add DesignWare SPI driver
- kernel: generic: add Huawei HINIC driver
- kernel: generic: add Microchip ENC28J60 SPI ethernet driver
- kernel: generic: fix UDPv6 GSO segmentation with NAT
- kernel: generic: net: phy: sfp: backport some FS copper SFP fixes
- kmod-r8101: load module at boot time
- kmod-r8125: load module at boot time, disable ASPM
- kmod-r8125-rss: enable ENABLE_MULTIPLE_TX_QUEUE
- kmod-r8126: load module at boot time
- kmod-r8126-rss: enable ENABLE_MULTIPLE_TX_QUEUE
- kmod-r8127: load module at boot time
- kmod-r8127-rss: enable ENABLE_MULTIPLE_TX_QUEUE
- kmod-r8168: load module at boot time
- kmod-r8168-rss: add variant
- lldpd: enable hardware inventory information (TLV) management
- mac80211: add patch to suppress PREP when mesh forwarding is disabled
- mac80211: atb1k: fix broadcast failures during GTK rekeying
- qmi: increase SIM power-cycle timeouts
Upgrading to 24.10
- Linux kernel: update from 6.6.86 to 6.6.93
- ucode: update from 2025-02-10 to 2025-05-11
- netifd: update from 2024-12-17 to 2025-05-23
- bcm27xx-gpu-fw: update to v1.20250430
- kmod-phy-realtek: backport upstream v6.15 patches
- kmod-phy-realtek: backport upstream v6.16 patches
- kmod-r8125: update to v9.016.00
- kmod-r8169: backport upstream v6.15 patches
- kmod-r8169: backport upstream v6.16 patches
Sysupgrade can be used to upgrade a device from 23.05 to 24.10, and configuration will be preserved in most cases. For for upgrades inside the OpenWrt 24.10 stable series for example from a OpenWrt 24.10 release candidate Attended Sysupgrade is supported in addition which allows preserving the installed packages too.
Known issues
- Sysupgrade from 22.03 to 24.10 is not officially supported.
- There is no configuration migration path for users of the ipq806x target for Qualcomm Atheros IPQ806X SoCs because it switched to DSA. You have to upgrade without saving the configuration.
''Image version mismatch. image 1.1 device 1.0 Please wipe config during upgrade (force required) or reinstall. Config cannot be migrated from swconfig to DSA Image check failed''- User of the Linksys E8450 aka. Belkin RT3200 running OpenWrt 23.05 or earlier will need to run installer version v1.1.3 or later in order to reorganize the UBI layout for the 24.10 release. A detailed description is in the OpenWrt wiki. Updating without using the installer will break the device. Sysupgrade will show a warning before doing an incompatible upgrade.
- Users of the Xiaomi AX3200 aka. Redmi AX6S running OpenWrt 23.05 or earlier have to follow a special upgrade procedure described in the wiki. This will increase the flash memory available for OpenWrt. Updating without following the guide in the wiki break the device. Sysupgrade will show a warning before doing an incompatible upgrade.
- Users of Zyxel GS1900 series switches running OpenWrt 23.05 or earlier have to perform a new factory install with the initramfs image due to a changed partition layout. Sysupgrade will show a warning before doing an incompatible upgrade and is not possible.
- LEDs for Airoha AN8855 are not yet supported. Devices like the Xiaomi AX3000T with an Airoha switch will have their switch LEDs powered off. This issue will be addressed in an upcoming OpenWrt SNAPSHOT and the OpenWrt 24.10 minor release.
- 5GHz WiFi is non-functional on certain devices with atb0k chipsets. Affected models include the TP-Link Archer C60 v1, and possibly others. For details, see issue #14541.
:strip_exif()/i/2004585566.png?f=thumbmedium)
/u/310291/crop5e72b7368763b_cropped.png?f=community){kind=small}
/u/94596/crop643fb12fd4e6d.png?f=community){kind=small}
:strip_icc():strip_exif()/u/53754/crop5f96dc1010e28_cropped.jpeg?f=community){kind=small}
/u/153017/crop5db8b9cc6dd4a.png?f=community){kind=small}
:strip_icc():strip_exif()/u/17092/rpi.jpg?f=community){kind=small}