Firmware-update: Draytek Vigor 2700/G/V/VG 2.6.3

Draytek heeft onlangs een nieuwe firmware klaar gezet voor zijn Vigor 2700, Vigor 2700G, Vigor 2700V en Vigor 2700VG routers die geschikt zijn voor het doorgeven van ADSL2, ADSL2+ en VoIP verbindingen. Het versienummer is aangekomen bij 2.6.3 en voegt verschillende nieuwe mogelijkheden en verbeteringen toe. De meegeleverde lijst met veranderingen ziet er als volgt uit:

New Functions:

• True IP DMZ function.
• Add "adsl2/2+ annex M" items on modulation box of WUI. ( modem code MUST be 121201 or later )
• Add "G.Lite" item on modulation box of WUI. (only support by modem code 1401201)
• Support "Packet-OVERDRIVE" for wireless.
• Add the content filter/CPA in VPN tunnel, which is in default route mode.
• new telnet command
  • adsl showbins - show dsl bits per bin(tone) information.
  • adsl optn dual on/off - ( enable/disable dual-lantency, but modem code MUST be 131701 or later )
• Add syslog for associate, disassociate, authentication and de-authentication event for wireless.
• Add DSL Annex Info on WUI.

Improvements & Corrected Problems:

• Correct the msnmessage/icq2000/sip portmap index problem.
• Enhance PPTP state transition to prevent from faked TCP port 1723 connections occupying PPTP resource.
• Without default dial-in preshared key, dial-in function is disable for dynamic ip client before. Now allow dynamic ip client to dial-in without default dial-in preshared key if use certificate to do authentication.
• Correct Wireless LAN WPA (802.1x) with freeRadius server interoperability issue which reported by UK AlwaysOn ISP.
• Improve some PPPoE interop issues, we have enlarged LCP_MRU_HI and reduced LCP_MRU_LO.
• Correct QoS/Firewall LED display issue.
• Correct a crash issue that update dtdns.com and click "View log" on DDNS WUI.
• Correct show issue on 'adsl status' for 'path mode' and 'dslam vendor information'.
• Improve that It is better to shift the pseudo port based on 32768 (0x8000) instead of 1024 (0x400).
• Correct a crash issue that run PPTP and IPSEC vpn service.

Note:

To turn on/off broadsoft call control mode, use the following telnet command:
> voip sip acc n -B val // where n means 1~6 SIP account; val means 0/1 representing turn off/on.

[break]De firmware is in de volgende twee smaken binnen te halen:
Draytek Vigor 2700/G/V/VG 2.6.3 - Annex A
Draytek Vigor 2700/G/V/VG 2.6.3 - Annex B

Versienummer	2.6.3
Website	Draytek
Download	ftp://ftp.draytek.nl/pub/Vigor2700/2.6.3/
Licentietype	Freeware