Draytek heeft een nieuwe firmware uitgave klaargezet voor zijn Vigor 2700, Vigor 2700G, Vigor 2700V, Vigor 2700VG, Vigor 2700Gi, Vigor 2700VGi, Vigor 2700e en Vigor 2700Ge-routers, die geschikt zijn voor het doorgeven van adsl2-, adsl2+- en voip-verbindingen. Het versienummer is inmiddels bij 2.8.3 aangekomen. De lijst met aanpassingen ziet er als volgt uit:
New Features:Improvement:
- Add a new telnet command "adsl showbins up" to show bits of bin on upstream.
- Add DSL default settings for Portugal.
- Support TFTP ALG..
- Add MTU size item on Web Interface.
- Add “Select all” button in DOS Web Interface.
- Corrected: IGMP Snoop (on Web Interface) can't be saved.
- Corrected: Modify ADSL modulation word from "T.1413" to "T1.413" on Web Interface.
- Corrected: Wireless connection failed while security set.
- Corrected: The router will reboot if 64 WPA clients connect to AP at the same time.
- Corrected: Wireless halt problem occurred if encryption client numbers exceed 62.
- Corrected: Display error in Trace Route Web Interface.
- Corrected: Packet fragmentation function error in the True IP DMZ application.
- Corrected: Daylight saving wrong in some time zone.
- Corrected: VPN (LAN to LAN) stop to dial out when connection failed and status stay in IF_LINKING.
- Corrected: VPN dial out failed and the status stay in IF_ASSIGNED for a long time.
- Corrected: Sipalg QoS class 1 and 2 default configuration setting error issue.
- Limit maximum PPP MSS to 1438 for Vietnam.
- Change the words from "Start IP Address" to "Assigned IP range".
- Modify the description for Corrected blocks and Uncorrected blocks in Online Status Web Interface.
:fill(white):strip_exif()/i/2000853498.jpeg?f=thumbmedium)
:fill(white):strip_exif()/i/1300455467.jpeg?f=thumbmedium)
:strip_icc():strip_exif()/u/3491/arnie2.jpg?f=community){kind=small}
