Draytek heeft weer eens een nieuwe firmware klaar gezet voor zijn Vigor 2700, Vigor 2700G, Vigor 2700V, Vigor 2700VG, Vigor 2700Gi en Vigor 2700VGi routers die geschikt zijn voor het doorgeven van ADSL2-, ADSL2+- en VoIP-verbindingen. Het versienummer is inmiddels aangekomen bij 2.7.3.1 en voorzien van de volgende lijst met aanpassingen sinds de vorige vermelding in de Meuktracker:
Version 2.7.3.1:
New Functions:Improvements & Corrected Problems:
- support T1.413 annex B on modem code "142112"
- support new annex A modem code "1411301"
- support zoneedit to DDNS
- support "port" telnet command
- support telnet commands to set adsl EC/bitswap parameters
- adsl bitswap x y
- adsl fdmec x
Notes:
- Improve that show ddns update message on syslog
- Correct wireless region code issue for Taiwan
- Improve that VTA + RVS-Com + ISDN and fax can't work
- Improve that Canon L200 ISDN Fax rate 14400 issue
- Correct that 2nd subnet(routed) cannot trigger ISDN Backup connection
- Correct that windows vista failed to get one IP if it connected with Vigor router at WAN side
- How to use Telent command to set "User Agent" for VoIP
voip sip misc -t <val> val = 0, hides SIP header User-Agent
val = 1, shows SIP header User-Agent
val = 2, use default User-Agent i.e. DrayTek UA-1.2.3
val = 3, use user-defined User-Agent
voip sip misc -u UAValue sets User-Agent to uaValue
Version 2.7.3:
New Functions:Improvements & Corrected Problems:
- Support four SSIDs for Wireless LAN.
- Support ISDN ON-Net/OFF-Net on ISDN models.
- Support RFC-3262 for VoIP (MWI (Message Waiting Indicator) and PR-ACK)
[break]De firmware is in de volgende twee smaken binnen te halen:
- Correct the issue of DDNS update twice in PPPoE mode.
- Improve PPPoE dial speed.
- Increase the voice volume of VoIP port.
- Improve VoIP stability.
- Improve the ISDN VTA stability.
- Correct an issue that the 2nd ISDN channel can not be used in ISDN Loop-through if ISDN port is connected with another ISDN phone.
- Expand the length of Username and Password from 15 to 63 characters in Mail Alert Setup.
- Improve the Telnet command "voip sip misc" to support "User Agent" for VoIP.
Draytek Vigor 2700/G/V/VG/Gi/VGi 2.7.3.1 - Annex A
Draytek Vigor 2700/G/V/VG/Gi/VGi 2.7.3.1 - Annex B