Op Xoverclocker.com is een interessant artikel verschenen over het koelen van een Thunderbird met behulp van twee compressors om een leuk phase change systeem te bouwen. Verder was er nog een 120W peltier element aanwezig om de temperatuur nog verder naar beneden te brengen. Hiermee was het mogelijk om een neuspeuterende Thunderbird @ 1211MHz niet warmer te laten worden dan -37° C. Onder load lag de temperatuur op -8° C. Niet echt spectaculair, maar ook niet slecht gezien de hitteproductie van een Thunderbird:
After I showed you the preview of this cooler several weeks ago.Now it 's time to show all of them.Almost two years ago,I made supercooled that composed of compressor based to cool the water reservoirs and then pumped it to cool the hot side of TEC which in turn cooled the processor. The results was good because I could cool the water down to at least -36 c and the overall system could be cooled down to -50 c at the cold plate.I had many good results of overclocking with this type of cooler although some results not the best but the average was out perform.With the same cooler gave me bore so I find the new type of cooling.
I saw a lot about direct compressor cooling.The first one from Kryotech which can be cooled to -40 c and Vaporchill with -20 c result.The price of them are too expensive although Vaporchill offer a lot of discount. So I try to make it one which should be more efficiency than both of them.
![]() |
Als je trouwens geïnteresseerd bent in de werking van dit soort koelingsystemen is dit artikel op Tom's Hardware Guide het lezen waard.