Installation is typical InWin slide-out tray style. After locating all the copper stand-offs and corresponding screws, not only does your board affix to the tray but all the relevant add-in cards plug in as well. If you assemble several systems per day, this feature can greatly enhance building quality and quantity. When youíre ready, just shove the entire conglomeration into the case and lock it into place with a screw.
Another feature, which could be good or bad, is the location of the exterior 3-1/2" slot at the very top of the unit. I personally like it way up there because when itís on the floor, the floppy (I still use one once a week or so) is within arms length. Of course, with a case two feet tall, anything in the first 3 slots is within arms length.