Chick's Hardware UK heeft een review gepost van de InWin Q500A, een bigtower die ook hier in de polder redelijk popi is:
I have always liked the motherboard tray, it is really a must have feature, especially on towers. I means that if you are building your computer, you don't have to turn your whole case sideways to install the motherboard etc. You can move to a small table and install your motherboard, cards, RAM and CPU, and then just simply slide the tray back into your case. One feature is a plastic bracket near the bottom front of the case, which clips on to the motherboard tray. This is good & bad. Good thing is that it holds the tray steady, so dampens vibrations. The bad thing is that the tray sometimes misses the bracket and does not pushed in fully. There is an option to buy a different motherboard tray from the ATX form factor to the ones such as Baby AT and Full AT. Which could enable future upgradability for different form factors, however, having said this the future looks like USB and Firewire devices....