AOpen AX6BC Pro Gold mobo review

Deez Tech heeft de AOpen AX6BC Pro Gold mobo een getest. Dit is een Slot-1 BX plank met 5x PCI, 2x ISA en 3 Dimm gleuven. Grappig is het gouden heatsinkje dat voor betere koeling zou zorgen. Hm, overklokken schijnt in ieder geval goed te gaan met dit plankje:

Overclocked stability for this board can be summed up with one word. "Awesome". As a matter of fact, I will go out on a limb and say that this board is a bit more stable than ABIT's BE6. With the BE6 I could only get to 600 MHz using 2.3 volt core voltage, where on the AX6BC Pro I could get to 621 Mhz using 2.2 volts. If I had the choice of going to 2.3 volts with this board, a stable 621 Mhz would probably be a reality. Keep in mind that for these tests I used Vantec's P3D-5030 pimping ass cooler for my overclocking madness. Check out our review of the P3D-5030 here. The cooler got a bit toasty to say the least at 621 MHz. In other words, don't try this at home with any sissy coolers.

Door Tweakers

Tweakers HQ

30-09-1999 • 18:56

2

Bron: Deez Tech

Lees meer

Reacties (2)

Sorteer op:

Weergave:

En ze hebben nog gelijk ook <img src=http://192.87.219.67/~femme/wot/forum/interface/smilies/smile.gif width=15 height=15>, heb maand geleden deze plank gekocht en werkt perfect.

Hoefde alleen maar cartridge eraf te halen en nieuwe fan erop te zetten (met heatsink) om mijn PII 333@416 te krijgen, maar aangezien ik geen die hard overclocker ben, weet ik niet of dat zo'n fantastische prestatie is. <img src=http://192.87.219.67/~femme/wot/forum/interface/smilies/smile.gif width=15 height=15>.
<img src=http://192.87.219.67/~femme/wot/forum/interface/smilies/smile.gif width=15 height=15> Zeer te spreken over de AOpen AX6BC. Mijn 333 P2 draait moeiteloos op 417MHz alleen op 500 mhz niet. De P3 450 draait met voldoende koeling op 600 MHz!! <img src=http://192.87.219.67/~femme/wot/forum/interface/smilies/smile.gif width=15 height=15>

Op dit item kan niet meer gereageerd worden.