zakalwe schrijft dat bij de site Accelerate Your Macintosh een handig stappenplan is verschenen voor Mac gamers. Daar wordt namelijk beschreven hoe je een standaard GeForce2 MX kan flashen met een Mac firmware zodat je de kaart kan gebruiken in je Macintosh. Het enige wat je moet doen is de BIOS versie bemachtigen voor een Mac GeForce2 MX (Apple Update), de BIOS file flashen richting je GeForce2 MX en je GeForce2 MX in je Mac stoppen. Alles op eigen risico natuurlijk :
The card I used is an Elsa (www.elsa.com) Gladiac MX - GeForce2MX, 32 MB SDR Ram, AGP board. This is a standard/classic reference board design, nothing fancy. It looked exactly like the Apple board except it did not have the extra video connector and was missing a chip which I assume is used for the other connector. I had learned previously that the EEPROM on my Elsa board was the same as the Apple board, a SST 39VF512 (NVFLASH shows it as: EEPROM man.ID,devcode (BF, D4) : SST 39VF512 2.7-3.6V 64Kx8, byte mode). Since the EEPROMs were the same, I was pretty sure I could get it to work without any hitches.[break]De laatste stap:[/break]Now your ready to go, simply put all the new extensions that came with the 1.1.1 updating into the extension folder, shutdown your Mac, plugin the PC AGP card and watch the smoke! ... umm, well, ok you shouldn't get any smoke... Mine worked first time and flawlessly. You might need to give it a little time to boot.
Zeker handig als je graag je hoogbejaarde ATi Rage Pro wilt vervangen...