Target PC heeft een kleine review klaarliggen van de IWill Slocket II, een socket370 naar slot-1 convertor die geschikt is voor zowel PPGA (Celeron) als FC-PGA (Pentium III E) processors. Hieronder wat overclocking resultaten met een P3-550E:
I know that many of you are dying to know how the 550e overclocked. How does 682 MHz (5.5 x 124) @ 1.6 volts sound? All with that small GlobalWin heatsink. I ran several benchmarks and let RC5 run for 14 hours with no problems noticed. With an FDP32 or Alpha it could have hit 732 MHz. All my attempts to reach 732 MHz locked up after the Windows splash screen. This CPU was not a preselected ringer either. It came in the plastic wrapped box and the sealed plastic container had not been opened or tampered with. This most likely is a very representative 550e. For all bus speeds above 100 MHz I used the 1/4 divider available with Abit's SoftMenu. That kept my PCI bus speeds in spec. Since the BX chipset doesn’t support the ˝ AGP divider I used a PCI video card for testing. Simply set the Slocket II's FSB jumper to "Auto" and you can use your motherboard's FSB settings instead.