Bij Sharky Extreme hebben ze een guide geschreven over hardeschijven . De meeste woorden in het artikel worden gebruikt voor het uitleggen wat de verschillen tussen alle hardeschijf interfaces zijn, zoals IDE, SCSI, FireWire, USB en zelfs Fibre Channel komt aan bod. Waarom ze het laatste hebben gedaan is mij een raadsel aangezien dit soort hardeschijven zelfs niet in de meeste servers te vinden zijn, en zeker niet te koop zijn de gemiddelde computerzaak. Naast het verhaal over de verschillende interfaces wordt ook nog besproken wat alle termen uit de HD wereld betekenen en wordt het geheel afgesloten met een verhaaltje over welke hardeschijf geschikt is voor wie:
Fibre channel is an interface much different from SCSI or IDE. It more closely resembles switched Ethernet and InfiniBand in that it is not intended for just hooking hard drives and peripherals up to a system. It is also intended for networking, sharing hard drive resources, and other high-bandwidth operations. Fibre channel is often used to connect a SCSI RAID (or RAIDs as the case may be) to a network of workstations or servers.
Fibre channel currently runs with 100MBps of real-world bandwidth, with a theoretical speed limit of 1.06Gbps. A few companies are shipping 2.12Gbps products, supporting the next generation speed of Fibre channel. Some of the ultra-high-end Fibre channel solutions (even the lowest ones qualify as high-end) on the market actually use multiple Fibre channels at once to achieve more bandwidth.
Unlike SCSI, Fibre channel's wiring is quite flexible. Where SCSI is limited to up to 12 meters, Fibre channel be run up to ten kilometers with fiber optic cabling and lesser but still very long distances using less expensive copper cabling.