Software-update: DietPi 9.14

DietPi is een lichtgewicht besturingssysteem voor zogenaamde singleboardcomputers. Het is op Debian gebaseerd en geoptimaliseerd om maximale prestaties uit de kleine computers te halen. DietPi heeft daarnaast ook een groot aantal ready-to-run applicaties die kunnen worden geïnstalleerd. Hoewel de naam anders doet vermoeden is het niet alleen geschikt voor Raspberry Pi's, maar ook prima te gebruiken op hardware van bijvoorbeeld Odroid, Orange Rock en Pine. Versie 9.14 is uitgekomen en hier zijn de volgende verbeteringen in aangebracht:

Overview

The June 22th, 2025 release of DietPi v9.14 comes with new images for the Orange Pi 5 Ultra and Orange Pi 5 Compute Module SBCs, the new software package GZDoom, improvements for NanoPi R4S/R5S/R6S/R6C, Orange Pi Zero 2W, SOQuartz, Odroid HC4 and additionally with several bug fixes.

New images

• Orange Pi 5 Ultra: Support for the latest successor of the Orange Pi 5 family has been added to DietPi. Compared to the original Orange Pi 5, it features DDR5 RAM, onboard WiFi 6E, 2.5 Gbit Ethernet, an eMMC slot, an additional HDMI input port, and supports NVMe SSDs up to 2280 format. It is very similar to the Orange Pi 5 Max, but one of its HDMI port is an input port. It is disabled by default but can be enabled via device tree overlay by setting overlays=hdmirx in your /boot/dietpiEnv.txt.
• Orange Pi 5 Compute Module: Support for the latest compute module from Xunlong/Orange Pi has been added to DietPi. It features an RK3588S SoC 2-16 GiB DDR4 RAM, 32-256 MiB onboard eMMC storage, other features depending on the used base board. It has been tested on the Tablet Base Board. If you have the other Base Board, please check the following discussion to check or report which features have been tested successfully: MichaIng/DietPi?7574

New software

• DietPi-Software | GZDoom: This modder-friendly OpenGL and Vulkan source port based on the DOOM engine has been added to our software catalogue. MichaIng/DietPi?7497

Enhancements

• Container: sysctl cannot change values from within containers, but it needs to be done on the host instead. When dietpi-software would apply sysctl settings for certain software options, on container systems, it instead shows a dialogue with additional information, and how to apply the suggested change on the host.
• NanoPi R4S/R5S/R6S/R6C: All onboard Ethernet adapters are now assigned a static MAC address.
• NanoPi R4S/R5S: A kernel patch was added which applies the native Ethernet driver LED triggers as default for their respective LEDs. In turn we remove the udev rules for the netdev trigger, which caused boot issues in rare cases, due to the needed interface up/down hack. The downside is that the native triggers do not indicate network activity, only a cable link as static light. MichaIng/DietPi#6951
• Orange Pi Zero 2W: Added udev rules to enable the Ethernet LEDs of the official Orange Pi Expansion Board. Request.
• SOQuartz: The recent kernel upgrade ships device trees for the Blade and Model A base boards. Previously, only the C4 base board was included. For now, the device tree needs to be adjusted manually in /boot/extlinux/extlinux.conf. If you own a Blase base board, please reach out. So we can figure out a method to detect it, and apply the correct device tree automatically on first boot.
• Odroid HC4: We created an own hardware ID and provide own images for this SBC from now on. Previously, Odroid C4 and HC4 shared the same hardware ID and bootloader. In recent versions, this caused issues with the USB ports on HC4, and it always had the issue that no SPI bootloader was shipped with the package. https://dietpi.com/forum/t/23524
• ARM SBCs: New ARM images with U-Boot /boot/boot.scr script usage will not make use of the legacy /boot/uInitrd format initramfs image anymore, but will load raw initrd images instead. This makes one step during initramfs updates obsolete, where an additional script converts the raw image generated by initramfs-tools into an uInitrd format image. However, for this to work, there are changes at multiple lines needed in the boot script, which is not trivial to safely patch during DietPi update. We might do it with a later release, but until then, if you are interested in applying the change, just reach out, and we will provide instructions.
• ARM SBCs: Similarly to above change, the /boot/boot.scr script of new images supports multiple device tree overlay prefixes. The overlays shipped with the kernel device tree package have different by times overlapping prefixes, also depending on the kernel version/branch. Especially for RK35xx SBCs this made it unnecessarily difficult to deal with overlays. This also opens the door for implementing a fully functional device tree overlay selection menu into dietpi-config, but with a later release.
• ARM SBCs: Realtek WiFi drivers for Rockchip/Allwinner/Amlogic mainline Linux builds have been reviewed and aligned: Where available, the module of the mainline RTW88 driver family has been enabled and respective 3rd party drivers disabled. If you have a WiFi adapter with RTL8814AU chip, and it is not working properly after the kernel upgrade, please inform us. It is the only missing dedicated driver module on Linux 6.12, compared to before the change. But another module from the RTL88XXAU family should work as fallback. MichaIng/DietPi#7151

Bug fixes

• Allwinner b: Resolved an issue where boot could fail with the new Linux 6.12 kernel on old systems. Reason is a too low memory address used to load the environment variables and device tree overlays to, overlapping with the memory region used by the raised initramfs image. MichaIng/DietPi#7557
• Raspberry Pi: Resolved an issue where on older images, hardware accelerated video codecs could stay disabled, even when enabling them via dietpi-config. We split camera and codec toggles a while ago, but did not migrate the module blacklists accordingly. This is now done via DietPi update for affected systems. MichaIng/DietPi#7491
• ROCK64: Resolved an issue where boot could fail with Linux 6.12 if a too old U-Boot version is present on the SPI storage. In turn, our new U-Boot package contains an SPI image as well, which will be flashed on DietPi update to prevent issues with the kernel upgrade. https://dietpi.com/forum/t/23426
• DietPi-Tools | DietPi-Backup: Resolved an issue where white spaces and some other special characters in the backup directory path were not correctly handled, when the config file is read. If you were affected be regular resets to the default path, please set the path once more after this update, and it should stay persistent. MichaIng/DietPi#7439
• DietPi-Software | X11: Resolved a regression where X11 was not actually installed, but only configuration files. MichaIng/DietPi#7560
• DietPi-Software | Home Assistant: Resolve an issue where the service could have failed to start after a reinstall (HA update) if the Python version was updated as well, due to an obsolete config file pointing to the old Python version. https://github.com/MichaIng/DietPi/issues/7525#issuecomment-2918176369
• DietPi-Software | Chromium: Resolved an issue where hardware acceleration on ARM systems was mostly disabled due to a faulty flag. https://dietpi.com/forum/t/22518
• DietPi-Software | Deluge: Resolved an issue where Deluge was not functional on Bookworm systems due to an unfixed incompatibility between the Deluge version and Python 3.11, shipped by Bookworm APT repositories. MichaIng/DietPi#6408

As always, many smaller code performance and stability improvements, visual and spelling fixes have been done, too much to list all of them here. Check out all code changes of this release on GitHub: MichaIng/DietPi!7585

Versienummer	9.14
Releasestatus	Final
Besturingssystemen	Linux
Website	DietPi
Download	https://dietpi.com/#download
Licentietype	Voorwaarden (GNU/BSD/etc.)