:fill(white):strip_exif()/i/2004765828.jpeg?f=imagemediumplus)
Er zijn geen actuele prijzen bekend van dit product.
Specificaties
Belangrijkste specificaties
-
Form Factor
ATX (Standard), EATX (Extended ATX), Mini-DTX, Mini-ITX, XL-ATX -
Behuizingtype
Tower -
Sidepanel
Plexiglas -
Volume
82,37L -
Grafische kaart maximum lengte
500mm -
Kleur
Zilver
Belangrijkste specificaties
-
Form Factor
ATX (Standard), EATX (Extended ATX), Mini-DTX, Mini-ITX, XL-ATX -
Behuizingtype
Tower -
Sidepanel
Plexiglas -
Volume
82,37L -
Grafische kaart maximum lengte
500mm -
Kleur
Zilver
Alles openen
Fysieke specificaties
-
Behuizingtype
Tower -
Form Factor
ATX (Standard), EATX (Extended ATX), Mini-DTX, Mini-ITX, XL-ATX -
Uitbreidingsslots aantal
8 -
Sidepanel
Plexiglas - Materialen Acryl, Aluminium, Staal
-
Grafische kaart maximum lengte
500mm -
CPU koeler maximum hoogte
170mm -
Voeding maximum lengte
220mm -
Opmerking lengte componenten
Maximum GPU Length: 500mm.
Maximum GPU Height: 170mm in standard orientation. Unlimited in vertical orientation.
Maximum CPU Cooler Height: 170mm.
Maximum PSU Length: 220mm (Space allowed for cables). -
Eigenschappen behuizing
Fan controller, Kabelmanagement, Open behuizing, RGB controller, Verticale GPU
Bays
- Interne bays 6x 2.5"
-
Opmerkingen bays
Storage: 6x 2.5”. 4 can be used at the same time. 2 are on top of the PSU shroud and cannot be used with vertically mounted GPUs. 4 are inside of the PSU Shroud.
Voeding
-
Inclusief voeding
- Voeding plaats Onder
- Voeding form factor ATX
Fans
- Fanondersteuning voor 120mm
- Fanondersteuning boven 120mm
- Max. aantal fans 3x Boven, 3x Voor
- Max. aantal fans totaal 6x
Radiator
- Radiator voor 120mm, 240mm, 360mm
- Radiator boven 120mm, 240mm, 360mm
- Opmerkingen radiators Radiators: 360mm x 60mm with 1 set of standard 25mm fans or 360mm x 40mm with 2 sets of standard 25mm fans.
Verlichting
-
LED verlichting
- LED kleur Multi-color
Afmetingen
-
Hoogte
595mm -
Breedte
545mm -
Diepte
254mm -
Volume
82,37L
Gewicht en kleur
-
Gewicht
14,5kg -
Kleur
Zilver
Garantie en bijzonderheden
-
Meegeleverde extra's
Integrated Components:
Reservoir: x1.
Pump Top: x1.
Pump Cover: x1.
Fill Port: x1.
Drain Port: x1.
Cable Combs: x1.
Hex Keys:
M3: x1
M4: x1.
M6: x1.
Cable Comb Sets: x1 (2 spare of each type).
Microfiber Cloth: x1.
Stop Fittings: x2.
5v D-RGB 50cm LED Strip: x3.
6mm Clear Cast Acrylic Side Panel Window: x1.
Vertical GPU Mount: x1.
PWM & D-RGB Hub: x1
PWM Fan headers: 6x.
PWM Fan Female to Female Extension Cable.
D-RGB Headers: 3x.
D-RGB Female to Female Extension Cable. - Fabrieksgarantie 1 jaar carry in
-
Bijzonderheden
Integrated Water-cooling Features
Reservoir, D5 Pump Top, D5 Pump Cover, Fill Port, Drain Port, roughly half of the cooling loop.
Integrated Cable Management Features
Cable management channels with cable combs:
3x 8pin EPS on the left side of motherboard and
up to two above the 24pin. 24pin Cable.
SATA Data x2.
6x PCIE go through the PSU Top Shroud
Reduced build time due to integration
With the pump and reservoir combo and roughly half of the loop integrated there is less assembly to be done.
Cable management is far quicker, just clip your cables in and they are all perfectly aligned.
Integration Cost Component:
A large portion of the case cost is due to the integration. These are components you do not have to purchase for your build. The pump and reservoir combo, less fittings, less tube, no cable combs, or cable management components.
Compatibility:
Theoretically the more integration the less compatibility. For Spectres integration the position of each integrated port and cable routing hole was carefully chosen based on statistics and our experience
Integration & Optimization:
With the integration we did not just develop a case, we also had to develop all the integrated components. This meant that we could focus more on optimization than would normally be possible.
The pump top was designed for the D5 pump, maximizing flow to and from the distribution plate.
The reservoir was designed to remove air as quickly as possible making the loop easier to fill.
The fill port is at the highest point on the back for the case and the drain point at the lowest point.
The cable channels and combs are designed for 4mm sleeved cables. They can be clipped in very quickly and there is far less work to do for clean cable management.
High End Components:
Spectre 3.0 fits XL-ATX motherboards and has 8 expansion slots. It is designed to fit the RTX 3090 Founders Edition even with the stock cooler. It can fit the largest PSUs up to 220mm. For the cooling system it can fit 2x 360mm radiators 60mm thick with a single set of fans and the powerful D5 pump.
Radiator Adjustment:
Spectre 3.0 has 6x 2.5” Drive positions. Two are on the top of the PSU shroud and there are four inside of the PSU shroud. The two on top of the PSU shroud cannot be used with vertically mounted GPUs.
Storage:
Spectre 3.0 has 6x 2.5” Drive positions, 4 of these can be used at the same time. Two are on the top of the PSU shroud and there are four inside of the PSU shroud. The two on top of the PSU shroud cannot be used with vertically mounted GPUs.
Meer informatie
- Product Singularity Cases Spectre 3.0
- Categorie Behuizingen
- Merk Singularity Cases
- Tweakers ID 1764382
- Specs van de fabrikant Productinformatie
Reviews door gebruikers
Er zijn nog geen reviews
Wil je de eerste reviewer op Tweakers zijn voor dit product?
Schrijf een reviewVraag & Aanbod
Wil je je eigen tweedehands product adverteren?
Meer over handelen in Vraag & Aanbod »