Populaire specificaties |
|
|---|---|
|
|
ATX (Standard), EATX (Extended ATX), Mini-DTX, Mini-ITX, XL-ATX |
|
|
Tower |
|
|
Plexiglas |
|
|
82,37L |
|
|
500mm |
|
|
Zwart |
Fysieke specificaties |
|
|---|---|
|
|
Tower |
|
|
ATX (Standard), EATX (Extended ATX), Mini-DTX, Mini-ITX, XL-ATX |
|
|
8 |
|
|
Plexiglas |
| Materialen | Acryl, Aluminium, Staal |
|
|
500mm |
|
|
170mm |
|
|
220mm |
|
|
Maximum GPU Length: 500mm. Maximum GPU Height: 170mm in standard orientation. Unlimited in vertical orientation. Maximum CPU Cooler Height: 170mm. Maximum PSU Length: 220mm (Space allowed for cables). |
|
|
Fan controller, Kabelmanagement, Open behuizing, RGB controller, Verticale GPU |
Bays |
|
|---|---|
| Interne bays | 6x 2.5" |
|
|
Storage: 6x 2.5”. 4 can be used at the same time. 2 are on top of the PSU shroud and cannot be used with vertically mounted GPUs. 4 are inside of the PSU Shroud. |
Voeding |
|
|---|---|
| Inclusief voeding |
|
| Voeding plaats | Onder |
| Voeding form factor | ATX |
Fans |
|
|---|---|
| Fanondersteuning voor | 120mm |
| Fanondersteuning boven | 120mm |
| Max. aantal fans | 3x Boven, 3x Voor |
| Max. aantal fans totaal | 6x |
Radiator |
|
|---|---|
| Radiator voor | 120mm, 240mm, 360mm |
| Radiator boven | 120mm, 240mm, 360mm |
| Opmerkingen radiators | Radiators: 360mm x 60mm with 1 set of standard 25mm fans or 360mm x 40mm with 2 sets of standard 25mm fans. |
Verlichting |
|
|---|---|
|
|
|
| LED kleur | Multi-color |
Afmetingen |
|
|---|---|
|
|
595mm |
|
|
545mm |
|
|
254mm |
|
|
82,37L |
Gewicht en kleur |
|
|---|---|
|
|
14,5kg |
|
|
Zwart |
Garantie en bijzonderheden |
|
|---|---|
| Meegeleverde extra's |
Integrated Components: Reservoir: x1. Pump Top: x1. Pump Cover: x1. Fill Port: x1. Drain Port: x1. Cable Combs: x1. Hex Keys: M3: x1 M4: x1. M6: x1. Cable Comb Sets: x1 (2 spare of each type). Microfiber Cloth: x1. Stop Fittings: x2. 5v D-RGB 50cm LED Strip: x3. 6mm Clear Cast Acrylic Side Panel Window: x1. Vertical GPU Mount: x1. PWM & D-RGB Hub: x1 PWM Fan headers: 6x. PWM Fan Female to Female Extension Cable. D-RGB Headers: 3x. D-RGB Female to Female Extension Cable. |
| Fabrieksgarantie | 1 jaar carry in |
| Bijzonderheden |
Integrated Water-cooling Features Reservoir, D5 Pump Top, D5 Pump Cover, Fill Port, Drain Port, roughly half of the cooling loop. Integrated Cable Management Features Cable management channels with cable combs: 3x 8pin EPS on the left side of motherboard and up to two above the 24pin. 24pin Cable. SATA Data x2. 6x PCIE go through the PSU Top Shroud Reduced build time due to integration With the pump and reservoir combo and roughly half of the loop integrated there is less assembly to be done. Cable management is far quicker, just clip your cables in and they are all perfectly aligned. Integration Cost Component: A large portion of the case cost is due to the integration. These are components you do not have to purchase for your build. The pump and reservoir combo, less fittings, less tube, no cable combs, or cable management components. Compatibility: Theoretically the more integration the less compatibility. For Spectres integration the position of each integrated port and cable routing hole was carefully chosen based on statistics and our experience Integration & Optimization: With the integration we did not just develop a case, we also had to develop all the integrated components. This meant that we could focus more on optimization than would normally be possible. The pump top was designed for the D5 pump, maximizing flow to and from the distribution plate. The reservoir was designed to remove air as quickly as possible making the loop easier to fill. The fill port is at the highest point on the back for the case and the drain point at the lowest point. The cable channels and combs are designed for 4mm sleeved cables. They can be clipped in very quickly and there is far less work to do for clean cable management. High End Components: Spectre 3.0 fits XL-ATX motherboards and has 8 expansion slots. It is designed to fit the RTX 3090 Founders Edition even with the stock cooler. It can fit the largest PSUs up to 220mm. For the cooling system it can fit 2x 360mm radiators 60mm thick with a single set of fans and the powerful D5 pump. Radiator Adjustment: Spectre 3.0 has 6x 2.5” Drive positions. Two are on the top of the PSU shroud and there are four inside of the PSU shroud. The two on top of the PSU shroud cannot be used with vertically mounted GPUs. Storage: Spectre 3.0 has 6x 2.5” Drive positions, 4 of these can be used at the same time. Two are on the top of the PSU shroud and there are four inside of the PSU shroud. The two on top of the PSU shroud cannot be used with vertically mounted GPUs. |
Meer informatie |
|
|---|---|
| Product | Singularity Cases Spectre 3.0 |
| Categorie | Behuizingen |
| Merk | Singularity Cases |
| Tweakers ID | 1764380 |
| Specs van de fabrikant | Productinformatie |