Hardware Central heeft een review van de Hercules Dynamite TNT.
Hier wat stuff over de overklokbaarheid van de Dynamite TNT:
Unlike overclocking a CPU, the contingency of overclocking the memory speed is based on the quality of the SDRAM. In the case of the Dynamite TNT, the quality of the SDRAM is quite high. In 2D running at a fairly standard 1024x768 with an 85Hz refresh, we were able to get the memory speed extremely high. With the STB Velocity, artifacts were observed (2D same setup as with the Dynamite) at any clock speed higher than 120Mhz. However, with the Dynamite TNT in 2D mode, we were able to run at 133Mhz (the max that PowerStrip would allow) without any observed artifacts. However, in Unreal, the highest stable clock speed that we could run at was 125Mhz.
Overclocking the core clock speed of the chip depends on how well the chip is cooled as well as the quality of the chip. With the Hercules Dynamite TNT that we tested, we were able to overclock about 10%, the same as with the STB Velocity 4400. However, the temperature of the Hercules Dynamite TNT was much lower than that of the Velocity when it was overclocked. The maximum that we were able to overclock the Dynamite core clock speed to was 100Mhz. When we tested it at any higher clock speeds, the system hung.
AGN Hardware heeft btw ook een review van deze TNT kaart, die kun je hiero bekijken.
Geen reclame hoor, maar Intercom Mailorder heeft de Dynamite TNT voor FL299,-. Dat is tot dusver de laagste prijs die ik voor een TNT plaat gezien heb.