Software-update: Zigbee2MQTT 2.14.2

Zigbee2MQTT logoVersie 2.14.2 van Zigbee2MQTT is uitgekomen. Zigbee2MQTT maakt het mogelijk om Zigbee-apparaten aan te sturen zonder gebruik te hoeven maken van de gateway of bridge van de fabrikant. Dit doet het door van MQTT gebruik te maken, waardoor het eenvoudig te integreren is in smarthomesoftware, zoals bijvoorbeeld Home Assistant, Homey of Domoticz. De changelog sinds versie 2.14.0 kan hieronder worden gevonden.

Zigbee2MQTT 2.14.2

Improvements
  • #13337 Aqara UT-A01E: support custom NTC floor sensors
  • #13315 NodOn SIN-4-1-20, SIN-4-1-21 and SIN-4-2-20: make wired input self-bind configurable
  • #13345 Tuya TS0601_cover_1: expose slat tilt on DP21
  • #13341 Yale LIA: expose lock action, source and user from operation events
  • #13310 Futurehome Charge: add plug lock state
  • #13322 LEDVANCE 4058075729025: expose power_on_behavior
  • #13323 LEDVANCE 4058075823976: expose brightness control
  • #13279 Namron 4566700: expose additional configuration settings
  • #13271 Namron 540139X: expose temperature_display_mode
  • #13288 OWON PC321: expose metering report schedule
  • #13268 SONOFF TRV-ZBT, TP-WGZBA: improve controls
  • #13247 Purmo/Radson Yali Parada Plus: add keypad lockout
  • #13256 SONOFF BASIC-ZB1GSP: read consumption and export energy attributes support
  • #13231 Tuya TO-Q-SYS-JZT: support more features
  • #13257 Tuya TS0001: expose power-on behavior, switch type, backlight, indicator and inching for _TZ3000_p26flek3
  • #13215 Namron 4512758: set duty cycle and cycle length in percent mode, fix backlight settings
  • #13218 SONOFF SNZB-09P: add alarmStatus reporting and chime presets, gated to firmware >= 1.1.9
  • #13223 SONOFF SWV: expose manual irrigation settings as scalar controls
  • #13204 SONOFF ZBMINIR2: expose more features
  • #13188 LinknLink eMotion Air: support more features
  • #13145 Namron Edge Thermostat (4566702/4566703/4512783/4512784): rework integration
  • #13162 Schneider CCTFR6000 UFH: expose demand percentage and cycle time per channel
  • #13146 Aqara QBKG11LM: add power_outage_memory support
  • #13148 Namron Edge Thermostat: allow regulator_cycle 0 and thermostat_mode_extra manual
  • #13136 Profalux MOT-C1ZxxC/F: expose internal temperature
  • #13140 Third Reality: add meteringOnlyMode attribute and command lookups
  • #13150 Tuya TS0601_rcbo: add over voltage/current/temperature/leakage threshold controls
  • #13112 Allow Tuya queryOnDeviceAnnounce to be a per-device function
  • #13116 Aqara ZNMHLDJ01LM: support more features
  • #12955 Bosch BSD-2: Add HA siren discovery
  • #13114 Decode Tuya firmware IDs
  • #13118 Tuya TS0726 1 and 3 gang scene switches: expose switch_inching on
  • #1893 Ember: support manufacturer code stack config
Fixes
  • #33236 Home Assistant: fix humidity incorrect for multi-endpoint climate devices
  • #33037 Home Assistant: fix cover state reporting when moving from fully opened/closed state
  • #33048 Home Assistant: support more action events
  • #32654 Preserve HA name if set in withHomeassistant and remove analog prefix
  • #33102 Prevent unhandled error within winston transports
  • #33206 Republish retained messages on MQTT reconnect
  • #13327 Aqara WSDCGQ12LM: use hPa for pressure
  • #13309 Develco SMSZB-120: fix temperature
  • #13285 FrankEver FK_V02 and FK-BV05: various improvements
  • #13318 Namron 4512783/4512784/4566702/4566703: set the clock as Unix local time
  • #13321 Namron Edge Thermostat: allow regulator_cycle = 0
  • #13329 Tervix _TZE284_6kijc7nd: fix system_mode
  • #13328 Tuya TS011F: Fix conditional switch_type_button expose
  • #13265 Aqara ZNXNKG02LM: Fix settings not working
  • #13276 DIYRuZ FreePad: prevent spurious "many_undefined" action from messages without presentValue
  • #13299 Fix iasWarning toZigbee converter
  • #13307 Legrand: fix configure failing for various devices
  • #13262 Manhot: fix endpoints on multiple devices
  • #13306 Moes ZG-101ZD / ZG-101ZL: ignore UNSUPPORTED_ATTRIBUTE in configure
  • #13302 RINNconnect WSER40: fix not controllable
  • #13270 SONOFF: SNZB-02M: fix pressure reading and reporting
  • #13274 Third Reality 3RSB22BZ: prevent spurious "many" action from messages without presentValue
  • #13277 Tuya TS0001: drop inching for _TZ3000_p26flek3
  • #13293 Zemismart ZM25RX-08/30: detect "stopped" motor_state
  • #13282 Zemismart ZMS-206US-4: handle proprietary status reports
  • #13267 Zosung: honor OFF when stopping IR learning
  • #13244 Aqara W600: improve external temperature handling
  • #13233 Onesti Products AS locks: PIN code format, source 0x05, capability attributes
  • #13229 Schneider Electric: declare hvacThermostat 0xE012 (open window detection status)
  • #13238 ShinaSystem CSM-300ZB_V2: rename transaction to transaction_interval
  • #13254 SONOFF S60ZBTPF/S60ZBTPG/BASIC-ZB1GSP/S61SZBTPB: mark outlet_control_protect as config entity
  • #13246 SONOFF ZBDongle-P: add as whitelabel of Custom devices (DiY) ti.router
  • #13224 Develco SPLZB-137/SPLZB-141: fix continuous acFrequency reporting
  • #13219 OpenLumi LR-DGNWG05LM, LR-ZHWG11LM: enable device temperature reporting
  • #13207 Tuya covers: fix motor_direction mapping
  • #13203 Tuya: decode 24 bit current and power in phaseVariant2WithPhase
  • #13192 Aqara SRTS-A01: expose identify
  • #13169 Aqara WSDCGQ12LM: fix temperature/humidity/pressure/battery not reporting
  • #13200 Moes ZHT-002: improve schedule mode
  • #13195 Sinopé Tb400ZB: split manufacturer-specific attributes out of the configure read
  • #13199 SONOFF SNZB-02WD and SNZB-02LD: adjust default reporting thresholds
  • #13196 SONOFF SNZB-06P24: disable default reporting for illuminance and occupancy
  • #13184 Tuya TS0601_heat_meter: correct heat meter switch and heat datapoint IDs
  • #13185 Zemismart ZM16B: query battery status
  • #13173 Aqara: allow effect_speed 0 when no effect is active
  • #13178 Expire cached transaction IDs so reused sequence numbers are processed
  • #13155 NodOn IRB-4-1-00: migrate to m.thermostat(), add IBH-1-1-00 offset
  • #13154 NodOn: fix switchTypeOnOff/switchTypeWindowCovering, give per-channel exposes their own endpoint
  • #13163 SONOFF MINI-ZBDIM: fix typo in calibration status lookup
  • #13161 Tuya TS130F: preserve start position before optimistic update
  • #13111 HOBEIAN ZG-IR01: Broadlink IR timings
  • #13143 SONOFF BASIC-ZB1GSP: skip onOff configReport for firmware >= 1.0.5
  • #13142 Tuya SDM01: allow data report duration below 30 seconds
  • #13151 Tuya TS0601_fan_5_levels_and_light_switch: expose as fan
  • #13115 Bituo SDM02-U01: add energy tier1&2
  • #33004 Cover: fix OPEN/CLOSE commands with invert_cover: true
  • #13124 Fix illuminance 0
  • #13117 Mowe MW781Z and MW783Z: add as white labels of TS0726
  • #13121 Neo NAS-AB06B2: fix alarm_state enum value
  • #12887 Nous B4Z: fix stale position after movement to absolute position
  • #13126 Philips gradient effect arguments
  • #12931 SONOFF ZBM5 no-Neutral: fix configure still failing
  • #13123 Tuya TS0224: add back max_duration
  • #13119 Tuya: fix inching payload corrupted by utf8 encoding of bytes >= 0x80
  • #12723 Definition generator: fix names of generated binary/analog clusters and use apptype to get the device class
  • #12944 IAS*: Convert various devices to modernExtend
  • #33001 Lumi ZNJLBL01LM: fix cover state
  • #13097 Moes GM25TEQ-TYZ-2/25: fix motor_direction
  • #13108 NodOn SEM-4-3-20: correct zigbeeModel to match real hardware variants
  • #13107 Shelly Gen4 devices: fix switch_mode values and switch_type write
  • #13110 Universal Electronics Inc XHS2-UE: use correct 3V_2100 voltage curve for battery percentage
  • #13106 ZHT-002-Correct-HVAC-to-Heat-Only
  • #1888 Z-Stack: fix permitting join through only coordinator allowing join via routers
  • #1891 ZBoss: refresh network info after formation
  • #1882 Ember: prevent possible crash on bad ZDO frame
  • #1866 Fix missing response ID for the foundation discover command
  • #1874 Preserve 0xFFFF manufacturerCode in genOta requests
  • #1858 Better handle discovery errors
  • #1855 Honor group command response status
  • #1863 Prevent creating groups with fractional IDs
  • #13338 Aqara JY-GZ-01AQ: report smoke alarm sent via IAS zone
  • #13333 Develco HESZB-120: fix temperature
  • #13324 Shelly S4DM-0010WW: fix power measurement exposure
  • #13320 SONOFF SNZB-03P: fix some attributes not working
  • #13336 Tuya TS0505B_2: fix ww/cw control
New supported devices

This release adds support for 83 devices:

  • #13304 100052992400 Atlantic Group Nirvana+ connected radiator horizontal 750W
  • #13304 100052994200 Atlantic Group Nirvana+ connected radiator vertical 1500W
  • #13312 1246595 Somfy Glydea2 Ultra 50 WF Zigbee curtain motor
  • #13319 291.45 Paulmann Smart Home Zigbee LED bulb 11W Matt E27 RGBWW
  • #13326 929004320801 Philips Hue Play Floor lamp large
  • #13313 929004610603 Philips Hue White and Color Lightstrip Flux (5m)
  • #13325 BVRF-L001 Beca VRF/VRV central air-conditioning thermostat
  • #13330 QADZ1LR QA 1 channel long range dimmer module
  • #13284 ZAS-01P Novato Smart siren with night light
  • #13187 ZSD20 AVATTO Smart smoke alarm
  • #13187 ZOT60 AVATTO Smart Plug
  • #13303 100042838900 Atlantic Group Thermor Equateur 5 electric radiator
  • #13308 8840100H Waxman leakSMART water sensor v2
  • #13266 allesin_cover Allesin Roller shade
  • #13213 BN0-S-03/PW STREDA 2-button wall switch
  • #13213 BN0-T-03/PW STREDA 4-button wall switch
  • #13213 BN1-1-03/PW STREDA Outlet
  • #13213 BN3-110-03/PW STREDA Outlet
  • #13213 DF3-11R-03/PW STREDA Outlet
  • #13213 BN1-C-03/PW STREDA Ceiling outlet
  • #13213 SN2-E-03/PW STREDA Spotlight dimmer
  • #13213 SN3-1TB5-03/PW STREDA Light and socket relay with buzzer and 4 buttons
  • #13213 SN3-1TB5K-03/PW STREDA Light and socket relay with buzzer, 4 buttons and doorbell push button
  • #13275 CH8Z AutomatOn Underfloor heating controller - 8 zones
  • #13296 CTL-Mini-DTP-TYZ/AC CTL Radar and PIR dual-technology presence sensor
  • #13297 HS118Z HYSYIOT Rainwater detection sensor
  • #13301 HS118Z HYSYIOT Rainwater detection sensor
  • #13269 HS208Z HYSYIOT PIR 24Ghz human presence sensor
  • #13259 JR-ZPM03 Girier Smart Plug
  • #13305 Ledron-YK-16-Mod Svetomaniya Ledron remote control with new firmware
  • #13258 S4SW-0A1X1EUL Shelly 1L Gen4
  • #13272 WNP10 Legrand Smart plug-in switch with Netatmo
  • #13283 ZM-108-M Moes Smart curtain switch module
  • #13243 10010339 LUUMR Smart LED G9 2,5W CCT Clear
  • #13221 81910 AduroSmart ERIA 5-in-1 Multi Contact Sensor
  • #13221 AD-DL4CT3001 AduroSmart ERIA Tunable White 4’’ Downlight
  • #13221 AD-DL4RGBW3001 AduroSmart ERIA Colors & White 4’’ Downlight
  • #13221 AD-DL6CT3001 AduroSmart ERIA Tunable White 5/6’’ Downlight
  • #13221 AD-DL6RGBW3001 AduroSmart ERIA Colors & White 5/6’’ Downlight
  • #13221 AD-FLMCT3001 AduroSmart ERIA Tunable White Filament Bulb
  • #13221 AD-GU10RGB3001 AduroSmart ERIA Colors & White Spotlight
  • #13235 KM6839 Miele Induction hob
  • #13226 LD6 Ubisys LED controller
  • #13250 OTH3600-GA-ZB Ouellet Zigbee smart floor heating thermostat
  • #13227 TS0601_wsek35um Tuya Radiator thermostat
  • #13239 WSP406 OWON Smart plug with energy metering
  • #13225 AE-5503-S-H-ZIGBEE Tuya Sauna thermostat
  • #13217 GDSD12LM Aqara Track light V1
  • #13217 GDGSD13LM Aqara Track grille light V1 (12-head)
  • #13201 MG-BJQ002 Moes Plug-in smart siren alarm with RGB night light
  • #13209 MW794Z Mowe Mausklick series 4 gang scene switch
  • #13193 LR-DGNWG05LM OpenLumi Lumi Router (for Xiaomi DGNWG05LM)
  • #13193 LR-ZHWG11LM OpenLumi Lumi Router (for Aqara ZHWG11LM)
  • #12586 MG-AU03 MakeGood Double GPO with light switch, energy monitoring and RGB backlights
  • #12586 MG-GPO02Z MakeGood Double GPO with energy monitoring and RGB backlights
  • #13190 MW836P Mowe Smart presence sensor with relay (24 GHz mmWave radar + infrared)
  • #13176 Neptun.Smart Sprut.device Neptun Smart leak protect module.
  • #13182 SNZT-03P SONOFF Smart Motion Sensor
  • #13183 SNZT-04P SONOFF Smart Door/Window Sensor
  • #13198 ST001 Gluon FCU thermostat with minimum temperature limit
  • #13194 TS0601_3ch_bidirectional_meter Tuya 3-channel bidirectional smart energy meter with relay
  • #13149 07519L Immax NEO Smart water leak sensor, Zigbee 3.0
  • #13175 CK-TLSR8258-L5PI-01(7009) eWeLink Zigbee 3.0 18W led light bulb E27 RGBCW
  • #13160 OPS305 OWON Ceiling mounted Zigbee presence sensor
  • #13160 WLS316 OWON Water leak sensor
  • #13160 PB206 OWON Panic button
  • #12688 SR-ZG9002KR12-Z4 Sunricher Zigbee smart wall panel remote with 4 group buttons, 7 scene buttons and rotary knob
  • #13177 TS0225_EKAZA Ekaza 24 GHz presence sensor
  • #13168 TS0601_air_quality_sensor_2 Tuya Air quality sensor
  • #13147 1443ZK CBE Thermostatic radiator valve
  • #13144 C-ZB-SSFS Candeo Smart switched fused spur
  • #13074 _TZE284_grxx6qek Tuya Temperature & humidity smart switch 16A
  • #13122 GKZ-LB431RGBCW-E26 Hejhome Z26 RGB+CCT light bulb
  • #13099 EKGD-T4085P-4Z Ekaza 4 gang switch with 2 gang socket 4x4
  • #13101 MS-63A Nova Digital Smart circuit breaker
  • #13094 ZG-303Z-z HOBEIAN Soil moisture sensor (pvvx/ZigbeeTLc)
  • #13294 TS0601_cover_with_1_switch_limited Tuya Cover switch (without position control) with 1-gang switch
  • #13174 ZNS-LRL2E Zemismart 30A immersion switch
  • #13349 KES-606US-L1 Zemismart Smart light switch - 1 gang (US)
  • #13342 Pro Line X10 Tervix Underfloor heating controller - 8 zones
  • #13281 TRV-ZBL SONOFF Zigbee thermostatic radiator valve
  • #13340 ZG-308Z HOBEIAN Water valve
  • #13332 ZY-N1 Tuya Sound level sensor
Fixed device detections
  • #13343 Detect EFEKTA_eTH_POW_E, EFEKTA_eTH_POW_E_WT, EFEKTA_eTH_POW_E_LR_WT and EFEKTA_eTH_POW_R_LR_WT as EFEKTA EFEKTA_eTH_POW, and EFEKTA_ePST_POW_V2_E as EFEKTA EFEKTA_ePST_POW_V2
  • #13317 Detect _TZ3000_f6pgzqob as EKAZA EKAC-T3093Z
  • #13290 Detect _TZ3000_ahvrgyac as Nous B2Z
  • #13292 Detect _TZ300A_57kqwetw as Tuya TS0726_4_gang_switch_and_4_scene
  • #13263 Detect _TZE204_58of2pfn as Tuya DIY-DC-04
  • #13295 Detect _TZE284_a0hirjnh as Tuya TS0601_cover_14
  • #13261 Detect _TZE284_pxwixtky as Tuya TS0601_cover_5
  • #13280 Detect `_TZE284_z98viqa6 as Moes SFD02-Z
  • #13260 Detect _TZE2841000000_n4ttsck2 as ONENUO 288WZ
  • #13264 Detect _TZE2841000000_u68q868h as Moes FWJZCEb8A001
  • #13291 Detect _TZE28C1000000_1youk3hj as RTX ZPS4
  • #13234 Detect _TZ3000_olo5jhjk as Tuya TS0001_power
  • #13230 Detect _TZE284_uenof8jd as Moes SFL02-Z-2
  • #13241 Detect _TZE28C1000000_pmbxyf97 as Zemismart ZMS-206US-4
  • #13253 Detect JM720ES-EF-3.0 as Moes ZC-HM
  • #13222 Detect _TZE284_zuq5xxib as ZMS1-TYZ
  • #13210 Detect _TZ3210_jrhczaaa as Girier TS130F_GIRIER
  • #13208 Detect _TZE200_fu14oapz as TS0601_cover_2
  • #13211 Detect _TZE28C1000000_rzdkn5rx as TS0601_multifunction_switch
  • #13205 Detect CK-BL702-AL-02(7008)-1 as Tuya CK-BL702-AL-01(7008_Z102LG01-1)
  • #13206 Detect PIIC5401 as Paulmann 291.48
  • #13170 Detect _TZ3210_cqqb61yo as ECODO BU-GU10-Zigbee
  • #13172 Detect _TZ3210_tlwlmwm6 as ECODO ECD-48V-MGT
  • #32914 Detect _TZE28C1000000_6fk3gewc as WETEN PCI E
  • #13181 Detect _TZE28C1000000_a2teqi5u as Zemismart ZMS-208US-2
  • #13189 Detect _TZE28C1000000_v5xjyphj as IOTPerfect PF-PM02D-TYZ
  • #13179 Detect _TZ3210_8etggm4u as ECODO PSL-24V/RGBCW/ECD
  • #13165 Detect _TZE2841000000_3mzb0sdz as Zemismart ZM16B
  • #13132 Detect _TZ3000_0lvv1d5b as Mowe MW811D
  • #13134 Detect _TZ3000_cb3aangp as Mowe MW786Z
  • #13130 Detect _TZ3000_syetgitm as Mowe MW815R
  • #13138 Detect _TZ300A_ohjmifiz as Mowe MW782Z
  • #13133 Detect _TZ300A_vkflnsl0 as Mowe MW784Z
  • #13141 Detect _TZ3210_o4vasvef as Ledisons LDN22-RGBWW5
  • #13139 Detect _TZ3210_rnj5wxxg as ECODO PSL-24V/RGBCW/ECD
  • #13135 Detect PIIC5800 as Paulmann 291.52
  • #13125 Detect _TZE284_lyqazpe6 and _TZE204_lyqazpe6 as Tongou TOQCB2-80
  • #33029 Detect _TZE284_sndkanfr as Lincukoo SZLMR10
  • #33032 Detect _TZE2841000000_6ycgarab as Tuya TS0601_smoke_co

Zigbee2MQTT 2.14.1

Notes
  • This hotfix release fixes several issues where cover states were inverted (e.g. #33004, #33014 and #33010)
Fixes
  • #33006 Home Assistant: add state class for formaldehyde
  • #33003 Home Assistant: fix some cover exposes
  • #13090 HOBEIAN ZG-IR01: fix temperature scaling when temperature_unit is fahrenheit
  • #13075 Schneider Electric S520567: fix entities postfixed with _cover
  • #13089 SONOFF: BASIC-ZB1GSP: reverse energy exposes by firmware version
  • #13092 Tuya TS0301_cover_1: expose battery
  • #13086 Fix cover state reversing open/close buttons for coverInverted devices
  • #13073 Legrand 067797: keep on/off working in dimmer_off (relay) mode
  • #13077 Manhot: add new modelIds
  • #13087 Schneider Electric S520567: restore cover state
  • #13081 Tuya: fix power-on behaviour not available
  • #13065 Ubisys: add convertGet for configure_device_setup so input actions/configs can be read back
  • #1860 Add fingerprint for zbt-1
New supported devices

This release adds support for 7 devices:

  • #13076 R12LM-Z20T Lincukoo Human Motion & Presence Sensor
  • #13076 B08LRT-Z10T Lincukoo 5in1 Sensor Button Switch
  • #13076 PZE2612 Lincukoo Outdoor Smart Plug
  • #13085 TS0601_6gang_switch_2 Tuya 6 gang touch panel switch with power monitoring and configurable indicator colors
  • #13093 ZNMHLDJ01LM Aqara Smart vertical blinds motor b
  • #13084 RDZ101ZB Siemens Connected Home wireless room thermostat
  • #13078 ZCMR-1 Nova Digital Roller blind motor
Fixed device detections
  • #13079 Detect _TZ3210_rnj5wxxg as ECODO ECD-SS12

Zigbee2MQTT

Versienummer 2.14.2
Releasestatus Final
Website Zigbee2MQTT
Download https://github.com/Koenkk/zigbee2mqtt/releases/tag/2.14.2
Licentietype GPL

Door Bart van Klaveren

Downloads en Best Buy Guide

02-10-2026 • 09:00

2

Bron: Zigbee2MQTT

Reacties (2)

Sorteer op:

Weergave:

Fijne software. Heb het zelfs draaien via ser2net om de dongel op afstand te kunnen gebruiken.

Anders dan Zwavel JS werkt zigbee2mqtt gewoon betrouwbaar. En simpel als addon van home assistant.
ZWaveJS werkt voor mij om en nabij net zo betrouwbaar. Enige issue dat ik periodiek met ZWaveJS heb is dat er vaker periodes zijn geweest dat de stick regelmatig vast liep. Maar na meermaals (weken / maanden lang) dit issue gehad te hebben is mijn vermoeden intussen dat dit komt door een vrijwel lege batterij in mijn Fibaro MultiSensor (aka: slechte / wegvallende verbinding doordat de sensor klappert). Het viel mij na de laatste keer vervangen van de batterij in ieder geval op dat ik dit issue niet meer gehad heb. Ik heb relatief weinig ZWave apparaten, en op batterij verder alleen een Neo Coolcam PIR, die nog veel langer op een batterij meegaat. Dus wellicht dat het issue daar ook mee speelt maar ik het niet gemerkt heb.

V.w.b. Z2M dan wel eigenlijk nooit issues gehad. In die denk 6 of 7 jaar dat ik het nu gebruik misschien 1x een revert gedaan na een update en ik meen ook 1x verder gemodderd met een apparaat dat niet meer goed werkte maar met een hotfix na een paar dagen was opgelost.

Edit:
Overigens had Z2M van vorige maand dan wel een relatief serieus issue waardoor rolluiken en dergelijke niet meer goed werkten (in combinatie met HA?). Waarvoor dan ook een hotfix gekomen is. Dus ook Z2M kent wel eens serieuzere issues waarvoor er een extra update komt (i.p.v. vast op de eerste van de maand).

[Reactie gewijzigd door RobertMe op 2 oktober 2026 09:57]


Om te kunnen reageren moet je ingelogd zijn