MikroTik heeft versie 7.21.4 van RouterOS uitgebracht, een besturingssysteem dat zich richt op het uitvoeren van routertaken en meer. Denk daarbij natuurlijk aan het routeren van netwerkverkeer, maar ook aan bandbreedtemanagement, een firewall, het aansturen van draadlozeaccesspoints, een hotspotgateway en een vpn-server. Het kan zowel op de hardware van MikroTik als op x86- of virtuele machines zijn werk doen. Voor het gebruik is een licentie nodig, die bij de aankoop van MikroTik-hardware is inbegrepen. De changelog voor deze uitgave kan hieronder worden gevonden.
What's new in 7.21.4:
- bgp - fixed stability issue when non-existent output select-chain was specified
- bgp-vpn - allow modifying scopes with routing filters
- bgp-vpn - fixed non-working import filter after reboot
- bgp-vpn - use target scope for imported route
- bridge - fixed missing dynamic "switch-cpu" VLAN entry in WiFi setup
- bridge - fixed performance regression in complex setups with vlan-filtering (introduced in v7.20)
- console - removed the "reset" command from shared settings menus (IP/IPv6/Bridge/L3HW/Neighbor-Discovery/Connection-Tracking)
- container - fixed issue where the container might not start after upgrading if root-dir was not set
- container - improved error message if a container fails to start
- defconf - fixed L009 configuration (introduced in v7.21)
- ethernet - fixed false excessive broadcast warning (introduced in v7.20)
- firewall - improved system stability
- ipsec - improved aes256-ctr stability on L009
- ipsec - removed modp8192 proposal on MIPS architectures
- ipv6,ra - use received prefix when RA on-link flag is 0
- isis - improved stability with fragmented CSNP
- l2tp - improved system stability on TILE architecture
- l3hw - fixed missing VLAN counters after reboot (introduced in v7.21)
- l3hw - fixed stability issue (introduced in v7.21)
- leds - fixed default LED configuration for CCR2004-1G-12S+2XS
- log - do not provide non-existent logging topics for configuration
- lte - fixed framed route support for the first APN
- lte - fixed missing automatic redial when cellular connectivity is lost for R11e-LTE
- lte - fixed user set MTU not applied to LTE interface
- lte - override the "auto" or 0 MTU in "interface" menu to 1500
- ospf - fixed typos in log messages
- ospf - improved stability on configuration change
- ovpn - fixed OVPN push routes
- poe-out - firmware update for CRS354-48P-4S+2Q+ (the update will cause a brief power interruption to poe-out interfaces)
- poe-out - fixed rare PoE-Out firmware upgrade failure on CRS354-48P-4S+2Q+
- ptp - allow manual domain configuration for 802.1AS profile
- ptp - set DSCP (EF) for the default profile when using IPv4
- qos-hw - display queue0 limits for CPU port
- qos-hw - fixed "offline" tx-manager ability to queue at least one packet (introduced in v7.21)
- qos-hw - prohibit setting CPU port with "offline" tx-manager
- route - added SLAAC route redistribution for IPv6 capable routing protocols
- route - do not set blackhole flag for synthetic routes
- route - improved service stability when removing routes
- routerboard - fixed applying settings via WinBox on devices with fixed CPU frequency
- routing-filter - added possibility to match SLAAC and bgp-mpls-vpn route types
- ssh - make login process asynchronous
- switch - fixed stability issue when changing bridge multicast-router property on CRS1xx/2xx (introduced in v7.19)
- system - added FCC Part 15 Compliance label to "System/Regulatory" menu
- system - improved stability for internal RouterOS service communication
- system - improved system stability
- system - improved upgrade service stability when the server is unreachable
- system - included full certificate chain to Windows executables
- user - properly apply login delay (introduced in v7.20)
- wifi-mediatek - fixed communication issues on 802.11ax access points with Intel clients
- wifi-mediatek - fixed HE capabilities IE on 2GHz band
- winbox - fixed "Remote AS" setting under the "Routing/BGP/Connections" menu
- winbox - fixed "Src/Dst Address Type" under the "IP/Firewall/NAT" menu
- winbox - fixed L3HW default value for VLAN interface (introduced in v7.21)
- winbox - properly display multiple bands for multi-link interface clients under registration table
- winbox - rearrange filter wizard parameters in tabs
- www - improved service stability when cancelling REST API sessions
:strip_exif()/i/2003203918.png?f=thumbmedium)
. Ik verwacht niet direct dat hier iemand meer info heeft over nakende releases, maar als dat wel het geval zou zijn, dan hoor ik het graag 
. :strip_exif()/u/16970/crop57cd1ef1eb0d0.gif?f=community){kind=small}
/u/197786/crop64b2f2dc4d188.png?f=community){kind=small}
/u/1401/haroid_icon_60x60.png?f=community){kind=icon}
:strip_icc():strip_exif()/u/506130/keitjes.jpg?f=community){kind=small}