Ricoh heeft enige dagen geleden met 2.11 als versienummer nieuwe firmware voor zijn GR Digital II-digitale camera's uitgebracht. De lijst met aanpassingen meldt verschillende kleine probleempjes die weggepoetst worden en ziet er dan ook als volgt uit:
Version 2.11:
Modified the following phenomena:Version 2.10:
- If you set the [Auto Aper. Shift] ON in the A mode, and you take a picture of a subject in high-intensity light, any key will not work.
- If a camera is configured in the following settings, and you go to the [CT] (Detail) setting in the white balance menu but you leave the selection screen without setting a value, and then if you take a picture and switch the MF with the Fn button, any key will not work.
The settings:
- Assigned [AF/MF] to the Fn button
- [ADJ shutter] ON
Add the following features. The detailed information is available in a PDF document:Modified the following phenomenon:
- [Correcting the White Balance in Shooting Mode] You can set the white balance correction manually in the shooting mode.
- [Correcting the White Balance in Playback Mode] You can compensate the white balance in a captured image manually.
- [WB Correct] for [ADJ Lever Set. 1/2/3/4] and [Function Button] You can register the [WB Correct] in an ADJ lever setting and the Fn button.
- [Detailed Information Display in Playback Mode] You can see the WB comp. value and the image setting value in the display.
- [Auto Aper. Shift] in Aperture Priority Mode. You can have the Auto Aperture shift feature in the A mode.
- [Reduction Image Noise] You can choose a noise reduction option depending on the ISO sensitivity.
- [ISO Sensitivity Display] The ISO sensitivity is displayed at your half-pressing the shutter release button, when you set [AUTO] or [AUTO-Hi] in the ISO sensitivity.
- With the [AutoRotate] is enabled (ON), if a playback image is rotated and make it enlarged, a histogram in the display may not appear properly.
Version 2.11:
Modified the following phenomena:Version 2.10:
- If you set the [Auto Aper. Shift] ON in the A mode, and you take a picture of a subject in high-intensity light, any key will not work.
- If a camera is configured in the following settings, and you go to the [CT] (Detail) setting in the white balance menu but you leave the selection screen without setting a value, and then if you take a picture and switch the MF with the Fn button, any key will not work.
The settings:
- Assigned [AF/MF] to the Fn button
- [ADJ shutter] ON
Add the following features. The detailed information is available in a PDF document:Modified the following phenomenon:
- [Correcting the White Balance in Shooting Mode] You can set the white balance correction manually in the shooting mode.
- [Correcting the White Balance in Playback Mode] You can compensate the white balance in a captured image manually.
- [WB Correct] for [ADJ Lever Set. 1/2/3/4] and [Function Button] You can register the [WB Correct] in an ADJ lever setting and the Fn button.
- [Detailed Information Display in Playback Mode] You can see the WB comp. value and the image setting value in the display.
- [Auto Aper. Shift] in Aperture Priority Mode. You can have the Auto Aperture shift feature in the A mode.
- [Reduction Image Noise] You can choose a noise reduction option depending on the ISO sensitivity.
- [ISO Sensitivity Display] The ISO sensitivity is displayed at your half-pressing the shutter release button, when you set [AUTO] or [AUTO-Hi] in the ISO sensitivity.
[break]
- With the [AutoRotate] is enabled (ON), if a playback image is rotated and make it enlarged, a histogram in the display may not appear properly.
:fill(white):strip_exif()/i/1225976707.jpg?f=thumbmedium)
/u/135262/icoag.png?f=community){kind=small}