Toevoegen aan favorieten · Meld misbruik
Advertentiedetails
| Vraagprijs | € 1,- |
|---|---|
| Verzendkosten | Exclusief |
| Staat | Nieuwstaat |
| Garantie | Nee |
| Verzending | ophalen en (pakket)post nationaal |
| Betaling | contant, bank vooraf en paypal vooraf |
Beschrijving
Chapter 1: Introduction
1-1 SCENIC Edition X101-Mainboard Specification and
Features
• Socket478 (CPU Clear Out Zone)
• Support single Intel® Pentium 4 3.06GHz+ 400/533 Mhz (Willamette /Northwood) &
Celeron processor
• Intel 845GV
• Intel ICH4
• SMSC LPC47M192
• 400/533 MHz
• Supports 2 x184 pin DIMM sockets
• Supports Non-ECC DDR266/DDR333 SDRAM
• Memory bandwidth up to 2.7 GB/s
• Support 64Mb, 128Mb, 256Mb, and 512Mb SDRAM technologies.
• Support minimum 64MB to 2GB maximum.
• Support suspend-to-RAM power state (ACPI S3)
• CYPRESS CY28323
• AGP v2.0 compliant
• Integrated Intel Extreme Graphic 2D/3D acceleration
• Integrated 350MHz 24bits RAMDAC
• Supports 4x AGP data transfers and 4x Fast Writes
• Optimized point-to-point topology using 1.5V signaling in 4x model
• ADI AD1981b codec.
• 3D audio compliant with AC’97 rev.2.3
• BROADCOM BMC4401 32bit PCI 10/100 baseT LAN
• Support all PIO modes
• 2 x IDE ports support up to four devices
• Support Ultra DMA 33/66/100
• 3 x PCI slots
• 4Mbit flash EEPROM
• AMI® BIOS, PnP, ACPI, SMBIOS 2.3, Boot Block, DMI
• WfM 2.0, DMI 2.0, WOL, SMBus
Processor
Chipset
Super I/O
Front Side Bus Frequency
Memory
Clock Generator
Video
Audio
LAN (option)
IDE Ports
Expansion Slots
BIOS
Manageability
5
• PCI 2.2 compliant
• USB 2.0
• Keyboard/Mouse/USB wake up
• Support S1,S3,S4 and S5 ACPI status
• Hardware monitor capability
• 1 x PS2 keyboard port
• 1 x PS2 mouse port
• 4 x USB ports
• 1 x RJ-45 LAN connector (option)
• 1 x Serial port
• 1 x Parallel port
• 1 x VGA connector
• 3 x Audio jacks (optional 2 channel audio output)
• 1 x ATX power connector
• 1 x +12V power connector
• 1 x Floppy connector
• 1 x Front panel connector (Switch, LED, IRDA) (ON / Flash / OFF)
• 1 x Header for front side audio LINE-OUT and MIC-IN
• 1 x onboard buzzer
• 1 x Fan headers for CPU, chassis and system
• 2 x ATAPI headers (CD IN, AUX IN)
• 1 x Header to support two USB ports at front side
• 1 x Header for chassis intrusion (option)
• Micro ATX form factor
• 9.6” x 9.6” (24.4cm x 24.4cm)
1-1 SCENIC Edition X101-Mainboard Specification and
Features
• Socket478 (CPU Clear Out Zone)
• Support single Intel® Pentium 4 3.06GHz+ 400/533 Mhz (Willamette /Northwood) &
Celeron processor
• Intel 845GV
• Intel ICH4
• SMSC LPC47M192
• 400/533 MHz
• Supports 2 x184 pin DIMM sockets
• Supports Non-ECC DDR266/DDR333 SDRAM
• Memory bandwidth up to 2.7 GB/s
• Support 64Mb, 128Mb, 256Mb, and 512Mb SDRAM technologies.
• Support minimum 64MB to 2GB maximum.
• Support suspend-to-RAM power state (ACPI S3)
• CYPRESS CY28323
• AGP v2.0 compliant
• Integrated Intel Extreme Graphic 2D/3D acceleration
• Integrated 350MHz 24bits RAMDAC
• Supports 4x AGP data transfers and 4x Fast Writes
• Optimized point-to-point topology using 1.5V signaling in 4x model
• ADI AD1981b codec.
• 3D audio compliant with AC’97 rev.2.3
• BROADCOM BMC4401 32bit PCI 10/100 baseT LAN
• Support all PIO modes
• 2 x IDE ports support up to four devices
• Support Ultra DMA 33/66/100
• 3 x PCI slots
• 4Mbit flash EEPROM
• AMI® BIOS, PnP, ACPI, SMBIOS 2.3, Boot Block, DMI
• WfM 2.0, DMI 2.0, WOL, SMBus
Processor
Chipset
Super I/O
Front Side Bus Frequency
Memory
Clock Generator
Video
Audio
LAN (option)
IDE Ports
Expansion Slots
BIOS
Manageability
5
• PCI 2.2 compliant
• USB 2.0
• Keyboard/Mouse/USB wake up
• Support S1,S3,S4 and S5 ACPI status
• Hardware monitor capability
• 1 x PS2 keyboard port
• 1 x PS2 mouse port
• 4 x USB ports
• 1 x RJ-45 LAN connector (option)
• 1 x Serial port
• 1 x Parallel port
• 1 x VGA connector
• 3 x Audio jacks (optional 2 channel audio output)
• 1 x ATX power connector
• 1 x +12V power connector
• 1 x Floppy connector
• 1 x Front panel connector (Switch, LED, IRDA) (ON / Flash / OFF)
• 1 x Header for front side audio LINE-OUT and MIC-IN
• 1 x onboard buzzer
• 1 x Fan headers for CPU, chassis and system
• 2 x ATAPI headers (CD IN, AUX IN)
• 1 x Header to support two USB ports at front side
• 1 x Header for chassis intrusion (option)
• Micro ATX form factor
• 9.6” x 9.6” (24.4cm x 24.4cm)