Toshiba MQ02ABF100, 1TB aangeboden

Gebruikte HDD:

SMART:
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA MQ02ABF100
Serial Number: 76ELC9DQT
LU WWN Device Id: 5 000039 723d06273
Firmware Version: DS001D
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: Not in smartctl database 7.3/6157
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Jul 22 19:28:50 2026 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 245) Self-test routine in progress...
50% of test remaining.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 206) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 128
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1738
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0
9 Power_On_Hours 0x0032 089 089 000 Old_age Always - 4682
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 691
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 5
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 375
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 5462
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 29 (Min/Max 20/59)
199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 8733051
200 Multi_Zone_Error_Rate 0x0032 100 100 000 Old_age Always - 32785378
240 Head_Flying_Hours 0x0032 095 095 000 Old_age Always - 2333
241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 7144225541
242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 858470293
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 1 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.