Bij de Hardware Demons is een artikel verschenen waarin dieper wordt ingegaan op de vulling van potloden. Kort na de introductie van de Socket A processors van AMD kwam dit antieke schrijf- en tekengerei weer in de belangstelling te staan omdat bleek dat het een uiterst effectief stukje gereedschap is om je Duron of Thunderbird te unlocken. Belangrijk om te weten voor een tweakers is natuurlijk welk soort potlood je het beste kan gebruiken voor deze operatie. Een vraag waar het artikel antwoord op geeft
:
2) What is the ratio of the material in the different categories of the lead? For example, which has the greatest graphite content - a H or a B pencil?
The softer the lead grade the higher the graphite content.
3) Is the lead used for mechanical pencils any different from your everyday "wooden" pencil?
The lead in mechanical pencils tends to be different from that used in woodcase pencils. They are generally referred to as polymer leads. In these a polymer such as polyfurfuryl alcohol is blended with extenders such as china clay. The lead is dried and then fired at 1000°C in an oxygen free atmosphere. The polymer then turns to carbon which gives the lead its blackness.
4) If you were going to use a woodcase pencil or a mechanical pencil, purely to lay down as much graphite as you could between 2 electrical contacts, which (in your opinion) would the better to use? Woodcase or Mechanical?
I would use a woodcase pencil, preferably a 6B grade.
| Asus A7M266 moederbord review | |
| Uitleg over Simultaneous Multithreading techniek |
Door 